Local mold removal
Mold Removal in Evergreen, CO
Get clear next steps for visible mold, musty odors, or moisture damage in Evergreen.
Call (844) 352-3560
Talk to a mold removal specialistAnswered 24 hours a day. No forms.
- Moisture source checked first
- Containment and HEPA filtration
- Homes, rentals and businesses
Moisture control mattersFix the water problem or mold can return.
24/7 callsDay, night, weekends and holidays
Moisture source firstFind and fix the leak or humidity
Contained work areaPlastic sheeting and HEPA filtration
EvergreenHomes, rentals and businesses
Local conditions
Local Factors for Mold Removal in Evergreen
Your property condition cannot be inferred from housing figures that describe the surrounding area. Base your plans for records, access and moisture repairs on assessment results.
8,602residentsACS 2024
11%of occupied housing units are rentedACS 2024
1976median year housing units were builtACS 2024
496residents 65+ live aloneACS 2024
Census ACS 2024 5-year (tables B01003, B25003, B25035, B09021 and B25024). Area estimates do not establish conditions at an individual property.
In Evergreen, renters occupy 11 percent of occupied housing units. For your property, record the rooms affected and ask who can authorize access before work begins.
The median year built for housing units in Evergreen is 1976. This does not establish your building age or condition. Keep dated photos of the affected area and a record of the repair and cleanup scope.
Single-family units make up 94 percent of all housing units in Evergreen. Before work starts, discuss access to the affected room and any adjoining space that needs inspection.
In Evergreen, 24 percent of residents aged 65 or older live alone. Ask who will repair the moisture source and who will replace any materials removed during cleanup.
Local Mold Facts for Evergreen
- License: Colorado does not appear to have a statewide license for mold assessors or remediators. A 2025 bill that would have had the state register them did not pass, so it is worth asking any contractor about their training and checking local contractor rules.
- Disclosure: Colorado's rental law, as updated in 2019 and 2024, lists mold tied to dampness that would materially interfere with a tenant's health or safety among the conditions that can make a rental uninhabitable. A 2025 bill that would have added written mold disclosures for sellers and landlords did not pass.
- Renters: Since 2025, Colorado rental agreements are to say where a tenant can report or deliver written notice of an unsafe or uninhabitable condition, so renters can start with that notice to the landlord.
- Agency: The Colorado Department of Public Health and Environment (CDPHE) is the state health agency that EPA lists as Colorado's indoor air quality contact.
State guidance: Colorado General Assembly, HB19-1170 Residential Tenants Health & Safety Act (summary as enacted); Colorado General Assembly, SB24-094 Safe Housing for Residential Tenants (summary as enacted); Colorado General Assembly, HB25-1202 Increasing Public Awareness of Mold Health Effects (lost); EPA, Who can test my home or clean, fix and remediate my home for mold?; EPA, Region 8 state indoor air quality contacts (PDF)
Call (844) 352-3560No forms. Just call.
Mold removal explained
Mold Removal: Scope and Purpose
Mold removal includes locating your moisture source and containing the affected area, discarding material beyond cleaning, and drying material that can remain.
You may see related work described as mold abatement, mold remediation, mold mitigation or mold cleanup. Your scope should cover damp materials, visible mold growth and the underlying humidity issue or water intrusion.
Wet materials should be dried within 24 to 48 hours to help prevent mold growth, the EPA advises. In Evergreen, a practical response is to stop the leak or humidity problem, limit disturbance, and check how far the growth extends before cleanup begins.
If your concern crosses a shared wall, ask who can authorize access on both sides and document which rooms need assessment.
- A musty odor or growth you can see
- Behind walls or floors, hidden moisture
- Mold near HVAC equipment
- Harm left by a flood or leak
Call (844) 352-3560Talk it through with a cleanup specialist
Health and safety
Moisture and Affected Materials to Check
Containment matters because disturbing affected materials can move mold spores and dust into clean rooms.
Hidden Materials Can Stay Damp
Your insulation, subfloor or framing could still be wet despite a surface appearing dry. Moisture readings help define the affected area.
Some People Face More Risk
Mold may bring on symptoms of allergies and asthma for some people. According to the CDC, higher risk applies to people with asthma, lung disease or weakened immune systems.
Color Does Not Measure Risk
Search terms include toxic mold and black mold. According to the CDC, mold color cannot tell you the level of risk.
Mold Spores Can Spread
Drywall cutting and carpet pulling can send particles into the air. To reduce movement, use negative air pressure together with HEPA filtration.
Call (844) 352-3560Answered 24/7, including holidays
What you get
Evaluating Mold Remediation Companies for Jefferson County Properties
Start With the Moisture Source
Ask how the leak, condensation or humidity problem will be found and corrected.
Request a Clearly Defined Scope of Work
Specify containment and affected materials in the scope, plus cleanup, repair and drying work and any factors affecting the price.
Use Independent Clearance Testing
An independent assessor can perform any needed post-remediation verification so the company doing removal does not also check that work.
Call (844) 352-3560Ask about cost and timing by phone
Every service
Explore All 44 Mold Cleanup Services in Evergreen
Pick a mold service based on the conditions you can see. Call for help choosing a page when you are uncertain about the fit.
Mold Removal by Area of the Home
- Ceiling Mold Removal
- Attic Mold Removal
- Wall and Drywall Mold Removal
- HVAC and Air Duct Mold Removal
- Wood Framing Mold Removal (Joists, Studs, Rafters)
- Basement Mold Removal
- Insulation Mold Removal
- Garage Mold Removal
- Crawl Space Encapsulation
- Closet Mold Removal
- Crawl Space Mold Removal
- Floor and Subfloor Mold Removal
- Kitchen Mold Removal
- Bathroom Mold Removal
Mold Removal Methods
Mold Inspection and Testing
Mold Removal Cost Guide
Call (844) 352-3560Private help, day or night
First steps
Preparing to Contact Mold Removal Professionals in Jefferson County
If safe, stop the water; leave growth undisturbed and keep records that may be useful.
Call (844) 352-3560- Stop the water safely. Have a repair arranged or shut the leaky fixture off. Avoid standing water as well as electrical equipment that is wet.
- Limit access. Keep the door shut if possible. Keep visible growth out of reach of children and pets.
- Avoid spreading particles. Do not brush, sand or scrape mold without containment. Turn off HVAC equipment that may contain mold.
- Photograph the damage. Make a record of visible growth, damaged belongings and the leak before anything is moved. Ask your insurer what records are necessary.
Step by step
The Mold Remediation Sequence
The mold remediation steps start with assessment and containment, followed by damaged material removal, cleaning, drying and verification, before containment comes down.
Mold Inspection and Moisture Mapping
A moisture meter and, when useful, a thermal imaging camera help trace the moisture source and affected materials.
Containment and Air Filtration
Use poly sheeting to create a containment barrier. A HEPA air scrubber is an air filtration device that, with negative air pressure, limits particle movement into clean rooms.
Removal of Damaged Materials
Workers use protective equipment. Damaged porous materials may require demolition, including drywall removal.
Surface Cleaning and Drying
Remaining non-porous surfaces are cleaned using damp wiping along with a HEPA vacuum. Use moisture readings, a dehumidifier and air movers to guide drying.
Final Cleaning and Verification
Post-remediation verification may include a visual check, clearance testing or air sampling by an independent assessor.
Price ranges
Understanding Mold Removal Cost in Evergreen, CO
Fixr puts mold remediation nationally at a typical $1,500 to $9,000. For professional work covering more than about 10 square feet, the listed rate is $10 to $30 per square foot. Your price depends on the affected area, materials, containment, drying and repairs.
Typical National Mold Remediation Range
$1,500 to $9,000Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Rate for Professional Work Above About 10 Square Feet
Per Square Foot: $10 to $30Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Typical Inspection With Lab Tests on Two Samples
$450 to $800Source: Fixr, Mold Inspection Cost (checked 2026-10-23)Insurance and who pays
Mold Removal in Colorado: Insurance Coverage and Payment
For insurance coverage, both the cause of moisture and policy matter. A covered sudden water event could qualify; ongoing leaks, neglect and humidity often face exclusions or limits.
Property Disclosures
Colorado's rental law, as updated in 2019 and 2024, lists mold tied to dampness that would materially interfere with a tenant's health or safety among the conditions that can make a rental uninhabitable. A 2025 bill that would have added written mold disclosures for sellers and landlords did not pass.
Renters and Landlords in Jefferson County
Since 2025, Colorado rental agreements are to say where a tenant can report or deliver written notice of an unsafe or uninhabitable condition, so renters can start with that notice to the landlord.
Homeowners Insurance and Mold Removal
Find out whether a mold sublimit applies and the water event qualifies for coverage, plus what an insurance claim requires before material removal.
Get a Mold Removal Service for Your Evergreen Property
Call whenever you need. Ask a mold cleanup specialist to walk you through the process ahead for your property.
Nearby locations
Mold Removal Services Near Evergreen
Questions
Answers to Your Mold Cleanup Questions
What duration can you expect for mold remediation?
The affected area, drying, material removal and fixing the moisture source determine how long it takes. Before starting work, ask about the order.
What should you check to find mold in your house?
Check around roofs, plumbing, HVAC equipment and windows for moisture signs, visible growth and a musty odor. You can trace damp material with a mold inspection. Mold testing is not required in every case with clear growth and an evident water source.
Is a different process needed for black mold?
Color alone tells you nothing about how risky mold is. Base the removal plan on the affected area, material, moisture source and containment needs.
When should you seek professional mold removal?
For areas above about 10 square feet, extensive water damage, sewage or contaminated water, or an affected HVAC system, EPA guidance points you toward professional help.
Can removed mold grow back?
Yes. Mold may come back when humidity, a leak or condensation goes uncorrected. Include identification of the moisture source and an explanation of drying and moisture control in the remediation plan.
Get Guidance From a Mold Remediation Company in Greater Denver
Calls are answered 24 hours a day, including weekends and holidays.