Local mold removal
Mold Removal in Commerce City, CO
You can call to discuss mold removal for a home, rental, or business in Commerce City.
Call (844) 352-3560
Talk to a mold removal specialistAnswered 24 hours a day. No forms.
- Moisture source checked first
- Containment and HEPA filtration
- Homes, rentals and businesses
Moisture control mattersFix the water problem or mold can return.
24/7 callsDay, night, weekends and holidays
Moisture source firstFind and fix the leak or humidity
Contained work areaPlastic sheeting and HEPA filtration
Commerce CityHomes, rentals and businesses
Local conditions
Mold Removal Conditions Around Commerce City
Area housing statistics describe local housing, without showing what condition your property is in. Plan access, moisture repairs and records around what an assessment finds.
66,445residentsACS 2024
23%of occupied housing units are rentedACS 2024
2005median year housing units were builtACS 2024
1,214residents 65+ live aloneACS 2024
Census ACS 2024 5-year (tables B01003, B25003, B25035, B09021 and B25024). Area estimates do not establish conditions at an individual property.
In Commerce City, renters occupy 23 percent of occupied housing units. Ask which rooms need to be accessible and where belongings can go during the assessed work.
The median year built for housing units in Commerce City is 2005. This does not establish your building age or condition. For your property, record the rooms affected and ask who can authorize access before work begins.
Single-family units make up 89 percent of all housing units in Commerce City. Keep dated photos of the affected area and a record of the repair and cleanup scope.
In Commerce City, 19 percent of residents aged 65 or older live alone. Ask who will repair the moisture source and who will replace any materials removed during cleanup.
Local Mold Facts for Commerce City
- License: Colorado does not appear to have a statewide license for mold assessors or remediators. A 2025 bill that would have had the state register them did not pass, so it is worth asking any contractor about their training and checking local contractor rules.
- Disclosure: Colorado's rental law, as updated in 2019 and 2024, lists mold tied to dampness that would materially interfere with a tenant's health or safety among the conditions that can make a rental uninhabitable. A 2025 bill that would have added written mold disclosures for sellers and landlords did not pass.
- Renters: Since 2025, Colorado rental agreements are to say where a tenant can report or deliver written notice of an unsafe or uninhabitable condition, so renters can start with that notice to the landlord.
- Agency: The Colorado Department of Public Health and Environment (CDPHE) is the state health agency that EPA lists as Colorado's indoor air quality contact.
State guidance: Colorado General Assembly, HB19-1170 Residential Tenants Health & Safety Act (summary as enacted); Colorado General Assembly, SB24-094 Safe Housing for Residential Tenants (summary as enacted); Colorado General Assembly, HB25-1202 Increasing Public Awareness of Mold Health Effects (lost); EPA, Who can test my home or clean, fix and remediate my home for mold?; EPA, Region 8 state indoor air quality contacts (PDF)
Call (844) 352-3560No forms. Just call.
Mold removal explained
What to Expect From Mold Removal
Your mold removal work involves containment of the affected area, identifying the moisture source, removing uncleanable material and drying whatever can stay.
Mold remediation, mold cleanup, mold abatement and mold mitigation describe related work. Include the water intrusion or humidity cause, visible mold growth and damp materials in your scope.
Wet materials should be dried within 24 to 48 hours to help prevent mold growth, the EPA advises. In Commerce City, a practical response is to stop the leak or humidity problem, limit disturbance, and check how far the growth extends before cleanup begins.
If your concern crosses a shared wall, ask who can authorize access on both sides and document which rooms need assessment.
- Growth you notice or a musty odor
- Behind walls or floors, hidden moisture
- Mold near HVAC equipment
- Harm left by a flood or leak
Call (844) 352-3560Talk it through with a cleanup specialist
Health and safety
Moisture and Affected Materials
Disturbing affected materials can send dust and mold spores into clean rooms, making containment important.
Some People Face More Risk
For some people, mold may trigger asthma and allergy symptoms. Risk is higher for people whose immune systems are weak or who have asthma or lung disease, the CDC says.
Mold Spores Can Spread
Pulling up carpet or cutting into drywall may release particles. Movement can be limited using HEPA filtration alongside negative air pressure.
Color Does Not Measure Risk
Toxic mold and black mold are terms used in searches. The CDC explains that the color of mold does not reveal the risk.
Hidden Materials Can Stay Damp
Even when surfaces appear dry, moisture may remain in subfloor, framing or insulation. The affected area is clearer with moisture readings.
Call (844) 352-3560Answered 24/7, including holidays
What you get
How to Compare Mold Remediation Companies in Adams County
Request a Clearly Defined Scope of Work
Specify containment and affected materials in the scope, plus cleanup, repair and drying work and any factors affecting the price.
Use Independent Clearance Testing
If post-remediation verification is needed, an independent assessor avoids having the removal company check its own work.
Start With the Moisture Source
Ask about the approach to finding and correcting a humidity, condensation or leak problem.
Call (844) 352-3560Ask about cost and timing by phone
Every service
Browse All 44 Mold Cleanup Services for Commerce City
Pick a mold service based on the conditions you can see. Call for help choosing a page when you are uncertain about the fit.
Mold Removal by Area of the Home
- Ceiling Mold Removal
- Attic Mold Removal
- Wall and Drywall Mold Removal
- HVAC and Air Duct Mold Removal
- Wood Framing Mold Removal (Joists, Studs, Rafters)
- Basement Mold Removal
- Insulation Mold Removal
- Garage Mold Removal
- Crawl Space Encapsulation
- Closet Mold Removal
- Crawl Space Mold Removal
- Floor and Subfloor Mold Removal
- Kitchen Mold Removal
- Bathroom Mold Removal
Mold Removal Methods
Mold Inspection and Testing
Mold Removal Cost Guide
Call (844) 352-3560Private help, day or night
First steps
Preparing to Contact Mold Removal Professionals in Adams County
If safe, stop the water; leave growth undisturbed and keep records that may be useful.
Call (844) 352-3560- Stop the water safely. Shut off a leaking fixture or arrange a repair. Avoid standing water as well as electrical equipment that is wet.
- Limit access. Close the door when possible. Keep visible growth out of reach of children and pets.
- Avoid spreading particles. Never scrape or brush mold, or sand mold, without containment. Stop running HVAC equipment when mold may be inside.
- Photograph the damage. Before moving anything, document damaged items, the leak and growth you can see. Check with the insurer about required records.
Step by step
Mold Remediation, Step by Step
The mold remediation steps start with assessment and containment, followed by damaged material removal, cleaning, drying and verification, before containment comes down.
Mold Inspection and Moisture Mapping
To trace affected materials and the moisture source, use a moisture meter and, where helpful, a thermal imaging camera.
Containment and Air Filtration
A containment barrier is made using poly sheeting. Negative air pressure and a HEPA air scrubber, an air filtration device, limit particles moving into clean rooms.
Removal of Damaged Materials
Workers wear protective equipment. Damaged porous materials may require demolition, including drywall removal.
Surface Cleaning and Drying
Clean remaining non-porous surfaces through damp wiping and use of a HEPA vacuum. Drying relies on a dehumidifier, air movers and moisture readings.
Final Cleaning and Verification
Post-remediation verification can involve clearance testing, a visual examination or air sampling, carried out by an independent assessor.
Price ranges
Discuss Your Mold Removal Cost in Commerce City, CO
Fixr puts mold remediation nationally at a typical $1,500 to $9,000. It lists $10 to $30 per square foot for professional work on areas over about 10 square feet. What you pay reflects materials, repairs, the affected area, drying and containment.
Typical National Mold Remediation Range
$1,500 to $9,000Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Areas Larger Than About 10 Square Feet: Professional Rate
Each Square Foot Costs $10 to $30Source: Fixr, Mold Remediation Cost (checked 2026-10-23)Typical Inspection With Lab Tests on Two Samples
$450 to $800Source: Fixr, Mold Inspection Cost (checked 2026-10-23)Insurance and who pays
Will Insurance Cover Mold Removal in Colorado, or Will You Pay?
For insurance coverage, both the cause of moisture and policy matter. Sudden water events covered by your policy may qualify, but humidity, neglect and persistent leaks commonly have limited or excluded coverage.
Renters and Landlords in Adams County
Since 2025, Colorado rental agreements are to say where a tenant can report or deliver written notice of an unsafe or uninhabitable condition, so renters can start with that notice to the landlord.
Property Disclosures
Colorado's rental law, as updated in 2019 and 2024, lists mold tied to dampness that would materially interfere with a tenant's health or safety among the conditions that can make a rental uninhabitable. A 2025 bill that would have added written mold disclosures for sellers and landlords did not pass.
Homeowners Insurance and Mold Removal
Ask whether the water event is covered, whether a mold sublimit applies and what an insurance claim needs before materials are removed.
Looking for a Mold Removal Service in Commerce City?
Call whenever you need. You can speak with a mold cleanup specialist about your property's next steps.
Questions
Your Mold Cleanup Questions
Does the process change for black mold?
Mold risk is not revealed by color alone. Use the affected area and moisture source, plus material and containment needs, to shape your removal plan.
What is involved in checking for mold in your house?
Search for a musty odor, visible growth and evidence of moisture by HVAC equipment, windows, plumbing and roofs. A mold inspection helps you trace damp materials. Mold testing is not always needed when growth and its water source are clear.
Under what conditions is professional mold removal suitable?
EPA guidance directs you to professionals for an affected HVAC system, sewage or contaminated water, extensive water damage, or areas exceeding about 10 square feet.
How long does mold remediation take?
How long it takes depends on the affected area, material removal, drying and correction of the moisture source. Request the planned order before work begins.
Can removed mold grow back?
Leaving a leak or a humidity or condensation issue unresolved can mean returning mold. The remediation plan should identify the moisture source and explain drying and moisture control.
Talk to a Mold Remediation Company Serving Greater Denver
You can reach someone by phone 24 hours a day, even on holidays and weekends.